First Three DePuy Cases settled by Johnson & Johnson for over $600,000

The DePuy metal-on-metal hip implant, approved by the FDA a mere seven years ago—has been inundated with over 8,000 lawsuits claiming the implant is inherently defective and can lead to costly and painful revision surgery as well as a myriad of other serious health issues. DePuy initially claimed the failure rate of the ASR metal hip implant to be between 4-5%. When DePuy voluntarily recalled the implant in 2010, they upgraded the failure rate to approximately 12% within the first five years. Studies independent of DePuy or Johnson & Johnson place the failure rate of the ASR metal implant at 50% within six years and 80% within eight years. These staggering numbers almost guarantee that this particular metal-on-metal hip implant will fail at some point in the majority of recipients.

Nearly a hundred thousand ASR devices were implanted worldwide prior to the recall with nearly forty thousand in the United States alone. The propensity of the implant to loosen and detach as well as the thousands of reports regarding adverse health effects from high levels of chromium and cobalt have led to over 6,000 lawsuits filed in federal court an another 2,000 filed at the state level in Maryland, California, Nevada and other states. Johnson & Johnson recently settled three Nevada cases for $600,000—an amount considered to be at the low end of the expected $200,000-$500,000 to settle each case. 

Attorneys of Sullo & Sullo Seeing DePuy Hip Implant Lawsuits Increasing

While many other firms have seen a drop in the number of metal hip implant clients, Sullo and Sullo attorneys have actually seen those numbers climb. Andrew Sullo, Class Action Lead Counsel & Managing Partner notes that “Although many firms have noticed a slowdown in the number of clients hiring them for DePuy ASR and Pinnacle lawsuits, our firm has not. I believe that is because we are constantly offering our clients new and updated information. Our job is to inform all metal-on-metal hip recipients that even though their hip may not have failed yet, it could and after August 26^th they may lose rights to recover compensation from Johnson and Johnson.”

With the statute of limitations coming up soon on the ASR metal-on-metal hip implant lawsuits, Sullo & Sullo is experiencing an increase in the ASR recipients who are coming forward and asking to be a part of the lawsuit. Many clients in the lawsuit have experienced adverse health effects as a direct result of having an ASR all metal hip implant put into their body.  On the other hand, many have experienced little or no pain with their ASR hip implant but have elected to join the lawsuit that they can be financial protected at a point in the future should their ASR device fail. Through no fault of their own, these people have become victims of a heavily flawed system which allows harmful medical devices to be sold to the public. The ASR was approved in 2005 by the FDA under the controversial 510(k) process which allows medical devices to essentially ride in on the coattails of other medical devices which have come before them. In some cases approval is granted based on a device which has actually been discontinued because of the number of problems associated with it.

Current Updates on the DePuy ASR Hip Recall

The DePuy ASR metal-on-metal hip implant was approved in 2005 by the FDA, but soon thereafter both DePuy and the FDA began receiving reports of adverse health events. Some believe that the much less rigorous 510(k) approval process which allows manufacturers to skip clinical trials could be at least partially responsible for the adverse health effects in the thousands of ASR recipients. Following a flurry of complaints, DePuy voluntarily recalled the ASR on August 26, 2010. At present there are approximately 4000 DePuy ASR lawsuits consolidated into an MDL in Ohio as well as a smaller mini-state consolidation in Chicago with approximately 600 plaintiffs and another in California containing 1500 or so plaintiffs. Since California is experiencing so many financial problems, the plaintiffs and their attorneys are expected to face problems in getting a trial setting.

The MDL, or multi-district litigation system is meant to streamline the litigation process, taking advantage of the fact that there are similar allegations from all plaintiffs made against the defendants—in this case DePuy and Johnson and Johnson. The first trial regarding the ASR was scheduled to begin in state court in Las Vegas in mid-December although it has been rumored the case settled prior to trial. Should this be true, it would be a positive precedent for all other ASR lawsuits to follow. The metal-on-metal design came about due to its ability to last significantly longer than the metal-on-ceramic or metal-on-plastic hip implants. Unfortunately, the metal-on-metal design allowed the cobalt and chromium ball and cup to shave off microscopic metal ions into the body, entering the surrounding tissues or even the bloodstream. The FDA recently held a two-day panel to discuss the safety of the metal hip implant.

Chromium and Cobalt Poisoning: What are the Long Term Side Effects of Metallosis?

It is likely that the recipients of a metal-on-metal hip implant have heard about the possible consequences from the metal shavings which can be released into the body when the metal cup and ball rub against one another during normal activities. Tiny ions of cobalt and chromium shear off when the two surfaces meet and those ions can lodge in the surrounding tissues or can end up in the bloodstream. As more and more metal hip implant patients are realizing the seriousness of metal toxicity, blood testing for elevated levels of metals is increasing. In many cases patients have been found to have levels of cobalt and chromium in their bloodstream which are as much as a hundred times normal levels. 

Although slightly elevated levels of these metals are fairly normal for patients with metal-on-metal hip implants, extreme elevations can be very dangerous—and anxiety-producing for the patient. DePuy released a report indicating that concentrations of the metals greater than 7 parts per billion are cause for concern. The Mayo Clinic has set somewhat different reference values, stating that blood serum concentrations of chromium greater than 1ng/mL suggests significant wear of the metal implant while serum concentrations greater than 5.0 ng/mL of cobalt can be considered toxic and also suggest significant wear of the prosthesis. Remember that 1 PPB (part per billion) equals 1.0 ng/mL.

Johnson & Johnson Hip Implant Settlement: Filing Deadlines are Approaching Fast

Many recipients of the ASR metal-on-metal hip implant are unaware of a crucial date which is fast approaching. The ASR was approved by the FDA in 2005 then labored under a flurry of adverse reports regarding early failure rates. Finally, on August 26, 2010, DePuy recalled the ASR, citing failure rates of around 12-13%--as opposed to their initial reports of 4-5% failure rates. What this means is that among the 26 states which operate under the two year statute of limitations, there is less than a month left to join in the multi-district lawsuits against DePuy. Of the more than 40,000 recipients of the ASR in the U.S. alone, only about 6,000 of those have joined in as plaintiffs in the DePuy suit. This means there are over 35,000 ASR recipients out there who have yet to come forward.

There may be several reasons for this including the fact that many of these people may be unaware of the recall. Others may be elderly recipients of the metal ASR and are simply chalking their negative health symptoms up to the aging process. It is believed, however that a large number of those who have not joined in the lawsuit have not done so because they are not yet experiencing problems, therefore believe they have no rights under the current lawsuit. It’s important that this group of people be aware that the actual failure rate of the ASR has been estimated at 50% at six years and 80% at eight years. Considering the ASR metal-on-metal implant has only been on the market since 2005 you can see that the likelihood of thousands more recipients having serious problems from the device is huge.

The DePuy ASR XL Acetabular hip replacement system was FDA approved - which might be more cause for worry than relief.

Since 1976, all medical devices must be classified and approved by the U.S. Food and Drug Administration (FDA) before they can be legally marketed to the public. It is the fond belief of many Americans that FDA approval is a ringing endorsement of a product's safety, a guarantee that the device has been tested and re-tested by professionals who are presumably trained to put the device through all kinds of rigor to triple-check its safety and effectiveness before allowing it anywhere near our fragile human bodies.

It is, as we say, a fond belief, but not an accurate one. It seems that many medical devices - including the recently recalled DePuy ASR XL Acetabular System - are given an FDA approval and subsequently placed inside people's bodies without ever going through a single test at the FDA.

The FDA department responsible for the regulation and review of medical devices is the Center for Devices and Radiological Health (CDRH). CDRH divides medical devices into three classes: life-sustaining, life-supporting or implantable devices are designated as Class III.

Hip replacements, including the ASR XL system, qualify as a Class III device and are considered high risk to the patient's health.

Class III devices can be approved by the FDA through one of two processes. The first, the premarket approval process (PMA) is more or less what we think of when we imagine our device being tested by the FDA: an extensive review including rigorous clinical trials that show it to be safe for use in humans. The PMA is quite detailed, lengthy, and expensive, usually costing the manufacturing company upwards of $250,000 and taking as much as two years to complete.

A quarter of a million is a large chunk of change - but thankfully for companies with a firm eye on their bottom line, there's always the second FDA approval process.

The premarket notification approval process, also known as the 510(k) approval process, is a sort of shortcut to approval that lowers the price point considerably - and also, conveniently, doesn't involve any pesky testing that might reveal a flaw in the product that would then have to be revamped and retested for another quarter-million.

The 510(k) process basically pre-approves any product that is deemed "substantially equivalent" to another product already legally approved for sale. It costs less than $5,000, requires no clinical trials, and only takes an average of 3-6 months to complete. It's a good shortcut for products that are essentially identical to their forebears. After all, it hardly makes sense to waste the FDA's time when they could be helping get new, innovative, life-saving products to market. But what's to stop companies from claiming their products are "substantially equivalent" to other FDA-approved devices even if they're not remotely the same? Read more .....

What is the FDA Approval Process for Hip Implants?

Since 1976, all medical devices must be classified and approved by the U.S. Food and Drug Administration (FDA) before they can be legally marketed to the public. It is the fond belief of many Americans that FDA approval is a ringing endorsement of a product's safety, a guarantee that the device has been tested and re-tested by professionals who are presumably trained to put the device through all kinds of rigor to triple-check its safety and effectiveness before allowing it anywhere near our fragile human bodies.

It is, as we say, a fond belief, but not an accurate one. It seems that many medical devices - including the recently recalled DePuy ASR XL Acetabular System - are given an FDA approval and subsequently placed inside people's bodies without ever going through a single test at the FDA.

The FDA department responsible for the regulation and review of medical devices is the Center for Devices and Radiological Health (CDRH). CDRH divides medical devices into three classes: life-sustaining, life-supporting or implantable devices are designated as Class III.

Hip replacements, including the ASR XL system, qualify as a Class III device and are considered high risk to the patient's health.

Class III devices can be approved by the FDA through one of two processes. The first, the premarket approval process (PMA) is more or less what we think of when we imagine our device being tested by the FDA: an extensive review including rigorous clinical trials that show it to be safe for use in humans. The PMA is quite detailed, lengthy, and expensive, usually costing the manufacturing company upwards of $250,000 and taking as much as two years to complete.

A quarter of a million is a large chunk of change - but thankfully for companies with a firm eye on their bottom line, there's always the second FDA approval process.

The premarket notification approval process, also known as the 510(k) approval process, is a sort of shortcut to approval that lowers the price point considerably - and also, conveniently, doesn't involve any pesky testing that might reveal a flaw in the product that would then have to be revamped and retested for another quarter-million.

The 510(k) process basically pre-approves any product that is deemed "substantially equivalent" to another product already legally approved for sale. It costs less than $5,000, requires no clinical trials, and only takes an average of 3-6 months to complete. It's a good shortcut for products that are essentially identical to their forebears. After all, it hardly makes sense to waste the FDA's time when they could be helping get new, innovative, life-saving products to market. But what's to stop companies from claiming their products are "substantially equivalent" to other FDA-approved devices even if they're not remotely the same? Read more .....

Defective DePuy ASR Hip Implants Should Consider The ARP Wave

Patients With Defective DePuy ASR Hip Implants Should Consider The ARP Wave

By Andre Sullo

SULLO & SULLO, LLP

Home |Personal Injury |DePuy Hip Recall |Traffic Tickets |Family Law |Criminal Defense |Get Informed

HOUSTON — In the wake of DePuy Orthopedics, Inc.’s recall of defective ASR hip implant devices, patients and their physicians have been searching for ways to mediate the potential health risks involved. With complications ranging from dislocation of the implant components and bone fractures at the hip, to metal poisoning, or metallosis, finding an accessible, effective treatment is imperative.

Enter the Accelerated Recovery Performance Wave (ARPwave) System, a revolutionary method that has been used by professional athletes and weekend warriors alike to treat muscle-related injuries and speed post-surgical rehabilitation for years. The invention of Denis Thompson, an exercise physiologist based in Burnsville, Minnesota, the ARPwave uses a patented bio-electrical current, simultaneously with active range-of-motion and other exercise techniques, to significantly speed up the body’s natural recuperative ability.

The ARPwave is a Class 2 medical device that is FDA authorized for muscle re-education; relaxation of muscle spasms; increased local blood circulation; prevention and retardation of disuse atrophy; and maintaining and increasing range of motion. Protocols can also be specifically used with the ARPwave to accelerate post-surgical muscle rehabilitation of the shoulder, elbow, wrist, hip, knee, ankle, foot, and cervical and lumbar spine. For this reason, the device would be useful to patients experiencing complications related to a defective DePuy hip implant device. Treatment of the affected area could significantly lessen long-term damage to muscles and bone surrounding the faulty implant.

To use the ARPwave, a valid prescription is required. The devices are licensed only to medical practitioners and select athletes for personal use. Treatment is not currently covered by most insurance plans, and individual sessions cost about $100. The number of sessions required depends on the severity of the damage to the muscles being treated.

A typical ARPwave session requires the patient to move, so wearing loose, comfortable clothing is recommended. Because the device is used to find the origin of the injury, the physician providing treatment moves electrodes around the affected area to search for “hot spots”.

These are areas of electrical disturbance in the muscle tissue that represent the root of the injury. Sessions can be intense and physically demanding, so it is recommended during the course of treatment that patients take measures to ensure their bodies recover properly. Typically, this means getting a good night’s sleep, eating healthy meals with adequate protein, avoiding/limiting alcohol consumption, etc.

If you or someone you know received a defective DePuy ASR hip implant, you should also obtain the counsel of an experienced personal injury attorney. The skilled team at Sullo & Sullo, LLP will aggressively defend your rights and make sure you get the compensation that you deserve, including coverage of the cost of treatments such as the ARPwave. Call us at 1-800-730-7607 or visit our website at www.sullolaw.com for a free legal consultation today.